Advertisement
Thumb Screws
Perimeter Shroud
Thumb Screw
FIGURE 3 Removing/Installing the Shrouds - Wheelchairs with Elevating Seat
Verifying/Repositioning the Seating System
Mounting Position
Perform the following actions depending on the seat type:
WHEELCHAIR AND SEATING
SYSTEM
TDX SC WITH VAN SEAT
TDX SC WITH FORMULA CG TILT
SEAT
TDX SC WITH ADJASBA SEAT
TDX SC WITH ELEVATE ONLY
TDX SPREE WITH FORMULA CG
TILT/ELEVATE SEAT
TDX SPREE WITH ADJASBA SEAT
(WITHOUT MANUAL TILT)
TDX SPREE WITH ADJASBA SEAT
(WITH MANUAL TILT)
NOTE: If necessary, re-position front riggings to ensure sufficient clearance for caster wheels. refer
to the seating system owner's manual.
Part No 1154307
Rear Half of Top Shroud
Thumb Screw
No seat adjustment required.
Verify seat position and move if necessary. Refer to TDX SC with
Formula CG Tilt seat on page 10.
Verify seat position and move if necessary. Refer to TDX SC with
ADJASBA Seat on page 12.
Verify seat position and move if necessary. Refer to TDX SC with
Elevate Only on page 13.
Verify seat position and move if necessary. Refer to TDX Spree
with Formula CG Tilt/Elevate Seat on page 15.
Verify seat position and move if necessary. Refer to TDX Spree
with ADJASBA Seat (without Manual Tilt) on page 17.
Verify seat position and move if necessary. Refer to TDX Spree
with ADJASBA Seat (with Manual Tilt) on page 18.
9
Front Half of
Top Shroud
Wheelchair Base
Frame
ACTION
TDX®SC/Spree Locking Cylinders
Advertisement
