Table of Contents
Advertisement
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
IMPORTANT NOTICE
This guide provides installation and operation instructions for the ClearPro
®
Technology
Filter Lateral Extension Kits. Consult Pentair with any
questions regarding this equipment.
Attention Installer: This guide contains important information about the
installation, operation and safe use of this product. This information should
be given to the owner and/or operator of this equipment after installation
or left on or near the filter.
Attention User: This manual contains important information that will help
you in operating and maintaining this product. Please retain it for future
reference.
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This is the safety alert symbol. When you see this
symbol on your system or in this manual, look for
one of the following signal words and be alert to
the potential for personal injury.
Warns about hazards that can cause death,
serious personal injury, or major property damage
if ignored.
Warns about hazards that may cause death,
serious personal injury, or major property damage
if ignored.
Warns about hazards that may or can cause
minor personal injury or property damage
if ignored.
NOTE indicates special instructions not related to hazards.
Carefully read and follow all safety instructions in this manual and on
equipment. Keep safety labels in good condition; replace if missing
or damaged.
Consumer Information and Safety
This product is designed and manufactured to provide many years of safe
and reliable service when installed, operated and maintained according
to the information in this manual and the installation codes referred to in
later sections. Throughout the manual, safety warnings and cautions are
identified by the "
" symbol. Be sure to read and comply with all of the
warnings and cautions.
Before installing this product, read and follow all
warning notices and instructions which are included.
Failure to follow safety warnings and instructions can result in severe
injury, death, or property damage. Call (800) 831-7133 for additional free
copies of these instructions.
Do not operate the filter until you have read and
understand clearly all the operating instructions and
warning messages for all equipment that is a part of the pool circulating
system. The following instructions are intended as a guide for initially
operating the filter in a general pool installation, however each installation
may have unique conditions where the starting procedure could be
different. Failure to follow all operating instructions and warning messages
can result in severe injury, death, or property damage.
To avoid this potential hazard, follow these instructions:
1. If you are not familiar with your pool filtering system and/or heater:
a. Do NOT attempt to adjust or service without consulting your dealer,
or a qualified pool technician.
b. Read the entire Installation & User's Guide before attempting to
use, service or adjust the pool filtering system or heater.
2. Before repositioning valve(s) and before beginning the assembly,
disassembly, or any other service of the circulating system: (A) Turn
the pump OFF and shut OFF any automatic controls to ensure the
system is NOT inadvertently started during the servicing; (B) open
the manual air relief valve; (C) stand clear of the filter; (D) wait until
all pressure is relieved.
3. Whenever installing the filter closure FOLLOW THE FILTER CLOSURE
WARNINGS EXACTLY.
4. Once service on the circulating system is complete FOLLOW SYSTEM
START-UP INSTRUCTIONS EXACTLY.
5. Maintain circulation system properly. Replace worn or damaged parts
immediately, (e.g., closure, pressure gauge, valve(s), o-rings, etc).
6. Be sure that the filter is properly mounted and positioned according
to instructions provided.
all applicable local codes and ordinances. Improper installation could result
in death or serious injury to pool users, installers, or others and may also
cause damage to property.
Always disconnect power to the pool circulating system at the circuit
breaker before servicing the filter. Ensure that the disconnected circuit is
locked out or properly tagged so that it cannot be switched on while you
are working on the filter. Failure to do so could result in serious injury or
death to serviceman, pool users or others due to electric shock.
the construction, installation, and operation of public pools and spas,
and the construction of residential pools and spas. It is important to
comply with these codes, many of which directly regulate the installation
and use of this product. Consult your local building and health codes
for more information.
®
CLEARPRO TECHNOLOGY
FILTER OPERATES UNDER HIGH PRESSURE.
When any part of the circulating system, (e.g., closure,
pump, filter, valve(s), etc.), is serviced, air can enter
the system and become pressurized. Pressurized
air can cause the top closure to separate which can
result in severe injury, death, or property damage.
Do not permit children to use or operate this filter.
RISK OF ELECTRICAL SHOCK OR
ELECTROCUTION.
This filter must be installed by a licensed or
certified electrician or a qualified pool serviceman
in accordance with the National Electrical Code and
This filter is intended for use in swimming pool
applications. Most states and local codes regulate
Filter Laterals Extension Kits Installation and User's Guide
ii
Advertisement
Table of Contents
