TESTING RELAY DIODE
Diode
Confidential & Proprietary – Property of Techtronic Power Equipment – DO NOT COPY or DISCLOSE
Diode Test:
1.
Turn Mower OFF.
2. Unbolt one leg of diode to disconnect from the
circuit.
3. Set DMM to "Diode".
4. Connect
red
lead at
red
black arrow. DMM should read approx 7V.
red
and black leads. DMM should
5. Reverse the
read "open circuit"
6. Replace or reconnect diode.
Note: Make sure diode is installed correctly. band on
diode indicates polarity
.
arrow, black lead at