Ryobi RY48140 Quick Start Manual

WARNING:
This Quick Start Guide is not a substitute for reading and following the operator's manual. To reduce the risk
of death or serious injury, user must read and understand the operator's manual before using this product.
Operating the Mower:
1
Test safety interlock system. See page 16 for details.
2
Adjust seat to desired position.
3
Verify battery charge level. Charge if needed.
4
Raise mower deck to highest position.
5
Make sure the drive levers are in the open position.
6
Insert start key and turn to ON position.
7 Release parking brake.
8
Drive to desired mowing location. For detailed driving instructions,
see page 16.
9
Stop mower, turn key to OFF, and set parking brake.
10
Lower cutting deck to desired position.
11
Turn start key to ON position and release parking brake.
12
Raise blade engage knob to activate blades and mow as desired.
When Finished:
1
Stop mower on a flat, level surface.
2
Push blade engage knob down to turn blades off.
3
Place the drive levers in the open position.
4
Set parking brake.
5
Turn key off.
Go to www.ryobitools.com and register your new tool on-line.
For any questions about operating or maintaining your product,
call the RYOBI Help Line! Your product has been fully tested prior
to shipment to ensure your complete satisfaction. Troubleshooting
tips are also available in your operator's manual.
QUICK START GUIDE
6 9 11 5
3
5 8 9 12 1 3
4 10
7 8 10
11 2
3
4
1
2
8 1
998000404
11-17-20 (REV:01)