Table of Contents
Advertisement
Voice Gateway 4000 Upgrade Guide
Choose the
3.
Select the
4.
From the
5.
table below:
•
•
•
Table 3-1.
Span Number
1st Span
2nd Span
3rd Span
4th Span
Click
6.
screen for your card pair(s).
When finished configuring all necessary card pairs, click the
7.
in the Communication Processor dialog box.
You will then see the CPCFG Complete dialog box. A message indicates to
restart the computer system. Do not restart the system.
Click on
8.
3-2
button to configure your new card.
Select
tab if not already selected.
Hardware
Hardware
tab screen, complete the following fields based on the
Set the
Hardware Interrupt Request (IRQ)
(refer to
Table
3-1).
Choose the
Base Address (XY 000)
set of up and down arrow keys to change the letter of the base address
(that is,
in D2000) and the right set of up and down arrow keys to
D
change the number (that is,
Make sure the default board type is used (that is,
Install Information for Each Span Type
IRQ Number
5
7
9
11
OK
when you have completed the options on the
.
OK
number to use for your card
to use for your card by using the left
in D2000) (refer to
2
Base Address
(XY000)
D0000
D2000
D4000
D6000
Table
3-1).
).
TX-2000
Board Type
TX-2000
TX-2000
TX-2000
TX-2000
Hardware
tab
button
Exit
303321-A Rev. 00
Advertisement
Table of Contents
