Uninstalling; Removing An Sfp / Sfp+ Transceiver; Removing An Scp / Stp Transceiver - Siemens SIMATIC NET SFP Series Operating Instructions Manual

Uninstalling

5.1

Removing an SFP / SFP+ transceiver

Notes on deinstallation
Risk of burns due to the high temperatures of the pluggable transceiver
The SFP / SFP+ transceivers can be plugged and pulled during operation. Leave the
transceiver to cool down as much as possible.
Procedure
Follow the steps below to remove an SFP / SFP+ transceiver:
1. Remove the connecting cable of the SFP / SFP+ transceiver.
2. Open the clip of the SFP / SFP+ transceiver.
3. Remove the SFP / SFP+ transceiver from SFP / SFP+ slot.
Note
Do not use force
It must be possible to remove the SFP / SFP+ transceiver easily and without applying any
force.
4. Close the SFP / SFP+ slot with a sealing plug.
5.2

Removing an SCP / STP transceiver

Notes on deinstallation
Risk of burns due to the high temperatures of the pluggable transceiver
The SCP / STP transceivers can be plugged and pulled during operation. Leave the
transceiver to cool down as much as possible.
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 11/2015, A5E02630804-08
CAUTION
CAUTION
5
21