Figure 7 Locating And Removing Main Board - Juniper QFX5120-48Y Manual

PSUs

Figure 7 Locating and removing main board

e. Heat sink support plate on bottom side of main board. Unfasten the
MAC heat sink screws (4x) to remove heat sink support plate.
Note: Heatsink need not be detached for removing support plate.
`
UNCLASSIFIED
Hold front panel cover on both hands and pull outward to remove front panel
UNCLASSIFIED
FANs
CPU Board
Main Board
5mm Hex standoff
MAC Heatsink screws
Main board screws
10/27/2021
6