Remove Non-Volatile Components From The System Board; Follow The Assembly Procedure In Reverse Order To Assemble The Qfx5120-48Y Chassis; Figure 17 Cpu Board Ideeprom And Cpld Spi Flash - Juniper QFX5120-48Y Manual
Identification of volatile and non-volatile storage and sanitization of system components
Table of Contents
Advertisement
Figure 17 CPU board IDEEPROM and CPLD SPI Flash
3.3 Remove Non-volatile components from the System Board
a. Remove the screw and unplug the M.2 SATA SSD module from its
socket. (Figure 14)
Note: Before removal, ensure J-TAC and the appropriate account team has
been notified of your intentions.
3.4 Follow the assembly procedure in reverse order to assemble the
QFX5120-48Y Chassis.
`
UNCLASSIFIED
UNCLASSIFIED
10/27/2021
13
Advertisement
Table of Contents
