Advertisement
Step Three
Insert Centre Rail (5) into the brackets in the centre of the Headboard (1) and Footboard (2).
Push down fully and secure in place using M6 x 25mm bolt (A) tighten screw with Allen Key M4 (D).
M6x25mm x2
Step Four
The two Slats (4) can be secured to the bed by inserting the slat with the Side Plastic Cap (C) pin into
the both side platform rail as shown in fig. 5. Then, press the Centre Plastic Cap (B) pin into the
center rail as shown in fig. 6. Repeat the step for further 14 times.
Fig
Slat
Centre Plastic Cap
Slat
Center Rail
M4 x1
Fi
fig. 5
Side Plastic Cap
fig. 6
Side Rail
M6 x 25mm
M4
Slat
4.
Slats x30
B.
Centre Plastic Cap x15
C.
Side Plastic Cap x30
Advertisement
