Advertisement
Quick Links
John Lewis
Morgan 90cm Guest Bedstead
Thank you for purchasing this Morgan Guestbed. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
Pre-assembly Preparation
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
HEAVY
This product is
WHEN LIFTING
This product takes approximately
The fittings pack contains
CHILDREN
.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the John Lewis
Helpline on 01244 - 689949 or e-mail: mail@fwgroup-uk.com
. It should be assembled as near as possible to the point of use.
to avoid personal injury and (or) damage to the product.
1 HOUR
SMALL PARTS
2 PEOPLE
to assemble with
KEPT AWAY FROM YOUNG
which should be
1/10
Stock number: 800/61601
For product support or spare parts please
call the John Lewis Helpline;
T: 01244 689949
E: mail@fwgroup-uk.com
TAKE CARE
.
Advertisement
Related Manuals for John Lewis Morgan Guest Bedstead 800/61601
Summary of Contents for John Lewis Morgan Guest Bedstead 800/61601
- Page 1 The fittings pack contains which should be CHILDREN Read this leaflet in full before commencing assembly. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 - 689949 or e-mail: mail@fwgroup-uk.com 1/10...
- Page 2 Fittings and parts checklist Bedstead Parts Headboard x 1 Footboard x 1 Side Rails x 2 Slat Set x 1 Fittings Bolt x 8 Screw x 8 (M8 x 22 mm) (M4 x 35 mm) Allen Key x 1 2/10...
- Page 3 Step by step assembly instructions Step One Fix the Side Rails (3) to the Headboard (1) and Footboard (2) using Bolts (A) as shown. Tighten using Allen Key (C). Please note both side rails have arrows indicating which way up they should Step Two Lower Slats (4) into the slatholder of the side rails and pull each end as close to the headboard and footboard possible so the slats are covering the full length of the bed.
- Page 4 Underbed assembly instructions 4/10...
- Page 5 Fittings and parts checklist Bedstead Parts Headpanel x 2 Leg Cross Rail x 2 Side Rail with Slat Set x 1 Legs x 2 Fittings Screw x 8 Screw x 4 (M6 x 60 mm) (M6 x 80mm) Screw x 8 Barrel Nut x 12 30mm (Ø4 x 35mm)
- Page 6 Step by step assembly instructions Step One Attach the Castor Wheels (F) into the Legs (3). Fix them by using Screws (G) as shown. G x 8 pcs F x 4 pcs CAUTION: Please do not place the truckle upon its side as it features a spring mechanism that could cause injury.
- Page 7 Step Two Put the Dowel (E) into the holes indicated on the legs of the Side Rails (3). Attach the Cross Rails (2) to the legs by using Barrel Nut (C) and Bolts (A). Tighten them by using Allen Key (H). Repeat this process on both sides of the Cross Rails (2) as shown in the diagram below.
- Page 8 Step Three Put the Dowels (E) into holes on Side Rails (3) then assemble the Head Panels (1) into side rails by using Screws (B). Tighten them using Allen Key (H). 8 pcs C x 4 pcs E x 4 pcs 8 pcs B x 4 pcs 8/10...
- Page 9 Step Four Lower Slats (4) into the slatholder of the side rails and pull each end as close to the headboard and footboard possible so the slats are covering the full length of the bed. Fix in place using Screws (D) as shown below.
-
Page 10: Care And Maintenance
Please be careful to retain all fittings when doing this. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com. John Lewis Partnership 171 Victoria Street London SW1E 5NN www.johnlewis.com...