Free-Standing - EAW UXA4401 User Manual

4.2 Free-standing

If not installed in an equipment rack, UXA4401 amplifiers can be
placed free-standing on a flat surface. Adhesive rubber feet are
supplied for this purpose.
UXA4401 amplifiers can also be attached to the
underside of desks or wall mounted using connecting
plate hardware. The adhesive rubber feet should
also be used in these circumstances to minimise
the possibility of vibration between the amplifier
and mounting surface. Wall and desk mounting is
illustrated in Diagrams 3a and 3b.
It is important in any free standing installation that
airflow through the amplifier's side panel mounted
fans and rear panel ventilation apertures is not
compromised by adjacent items. At least 80mm of free
space behind the amplifier and 25mm along at least
one side should be retained at all times.
Diagram 3b
UXA4401
wall and under-desk mount.
Installation
Mounting Plate +
2 x M3 x 6 countersunk
with desk/wall Mounting Plate and adhesive feet.
2 positions and 4 positions.
Diagram 3a
UXA4401
Adhesive Foot
4 positions