Installation - EAW UXA4401 User Manual

4. Installation

Note: The rack mounting and desk/wall mounting components
described and illustrated in Sections 4.1 to 4.3 are not supplied
with UXA4401 amplifiers but are available to purchase as
accessories. Contact your amplifier re-seller for more information.
4.1 UXA4401 Mounting
The UXA4401 amplifiers are shipped without rack mount
hardware attached but can be configured for rack installation
using one standard rack 'ear' and one half-rack extension piece
as illustrated in Diagram 2a. The installation and equipment rack
should be configured to provide appropriate ventilation airflow
space around the sides and rear of the amplifier as illustrated in
as illustrated in Diagram 1a. Ventilation airflow space of at least
25 mm (1 in) should be maintained along at least one side of the
amplifier at all times. Ventilation apertures are also located on
the rear panel of the amplifier and must not be obstructed. It is
important to retain at least 80 mm (3.1 in) free space for airflow
behind the amplifier rear panel.
In addition to rack mount ears, optional rack mount rear support
hardware is available and can be attached to the amplifier. Rear
support hardware may be appropriate if the amplifier is to be
used in a mobile rack or potentially be subject to significant
movement. Diagram 2b illustrates the use of rack mount rear
support hardware.
Multiple UXA4401 amplifiers can also be mechanically
connected using accessory connecting plates. Diagram 2c
illustrates the use of connecting plates.
2 x UXA4401with Connection Plate. 2 positions
Installation
Connection Plate +
4 x M3 x 6 countersunk
Diagram 2a
UXA4401
Rack Ear + Half-rack Extension.
Diagram 2b
UXA4401
Rack Support hardware. 2 positions.
Rear Support + Button +
1 x M4 x 8
Diagram 2c
Rack Ear +
2 x M4 x 8
countersunk
Half-rack Extension +
2 x M4 x 8 countersunk