Sony DSC-HX300 Service Manual page 13

1-7. ORNAMENTAL PLATE REPLACING METHOD
Removal
(1) Pour a solvent such as alcohol from four places A to the tweezers or a needle shown below into a gap of Ornamental Plate.
(2) Remove the Ornamental Plate.
A
Tweezers
Solvent
A
(3) Remove the three screws to detach the Filter Screw Frame Assy.
Filter Screw Frame Assy
Installation
(1) Match the boss of the Filter Screw Frame Assy with the concave of the 1st Frame Assy, install the Filter Screw Frame Assy, and then tighten three
screws.
Filter Screw Frame Assy
1st Frame Assy
(2) Peel off the release paper of the Ornamental Plate and stick the Ornamental Plate matching the boss of the Ornamental Plate with the screw A
position.
Ornamental Plate
DSC-HX300_L2
Ornamental Plate
Boss
Concave
Screw A position
Boss
1-8. 2ND ASSY REPLACING METHOD
Removal
(1) Peel off the Polyester Tape.
(2) Unsolder the Main Flexible Board and the Shutter Flexible Board.
Polyester Tape
(3) Peel off the Shutter Flexible Board.
Adhesive Tape
(4) Disconnect the 5th Assy Flexible Board from the connector on the Main Flexible Board.
5th Assy
Flexible Board
Main Flexible Board
1-10
Shutter Flexible Board
Main Flexible Board
Solders
Shutter Flexible Board
Main Flexible Board