Nokia N80 User Manual page 97

Nokia n80: user guide
Hide thumbs Also See for N80:
Table of Contents

Advertisement

points can share a data connection. In the UMTS network,
data connections remain active during voice calls.
You can also use a wireless LAN data connection. See
'Wireless LAN', p. 13. Only one connection in one wireless
LAN can be active at a time.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
and connect to the Internet
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
Access points
You may receive access point settings in a message from a
service provider. See 'Data and settings', p. 48. Some or all
access points may be preset for your device by your service
provider or network operator, and you may not be able to
change, create, edit, or remove them.
protected access point.
indicates a packet data access point, and
wireless LAN access point.
Tip! To create an Internet access point in a wireless
LAN, press
Availab. WLAN
To create a new access point, select
access
Options
provider.
Connection
connection.
Data
bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined
be left empty, unless you have been instructed otherwise
by your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
indicates a
Access point
from your network operator or service provider.
, and select
Connect.
>
Options
>
Define access
point. To edit the settings of an access point, select
> Edit. Follow the instructions from your service
name—Enter a descriptive name for the
or with a red asterisk. Other fields can
name—You obtain the access point name
Copyright © 2006 Nokia. All rights reserved.
a
>
Conn. mgr.
>
point.
Options
>
New
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

N80-1

Table of Contents