Nokia N80 User Manual page 104

Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with .
Network mode
operator)—Select which network to use. If you select
mode, the device uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Operator selection—Select
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
104 Copyright © 2006 Nokia. All rights reserved.
(shown only if supported by the network
Automatic to set the device
Cell info display—Select
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Enhancement
In the standby mode,
Dual
is connected, and
Bluetooth connectivity to a headset is lost.
compatible loopset is connected and
compatible Text phone
Select Headset, Loopset,
handsfree, or Car kit
Default profile—Set the profile that you want activated
each time you connect a certain compatible enhancement
to your device. See 'Profiles—set tones', p. 91.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to
answer is disabled. Automatic answer is not available for
Text phone.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
On to set the device to indicate
indicates a compatible headset
that the headset is unavailable, or a
indicates a
that a
is connected.
Text phone, Bluetooth
and from the following:
Beep once or Silent, automatic