Installing The Crosspiece - Siemens CELSIUS M450 Replacement

26

Installing the crosspiece

Fig. 24: Installing the crosspiece
•
Insert the crosspiece into its brackets (a) on the back of the housing at a slight angle.
•
Press the crosspiece into the housing in the direction of the arrow (1) until the lugs (b) of
the crosspiece hook into the brackets (c) in the housing.
•
Install the side fan
•
Install the ventilation duct
•
Close the housing
CELSIUS M450/440
NOTE
Make sure that the Plexiglas plate of the crosspiece is not
pinched between the memory slots.
(Installing the side fan / p.
(Installing the rear fan and the ventilation duct / p.
(Closing the housing / p.
TD00-400.841.40.02.02
01.08
Fans, ventilation duct, crosspiece
19).
10).
Page 26 of 52
CS SD SP/CO
0
23).
Siemens
Medical Solutions