Allowing An Sra -> Lan Connection - SonicWALL SRA 1200 Getting Started Manual

5. On the 'Server Private Network Configuration' page, enter
the following, and click Next:
Server Name Name for the SonicWALL SRA
Server Private SonicWALL SRA's 'X0' IP address,
IP Address 192.168.200.1 by default
Server Comment Brief description of the server
6. On the 'Server Public Information' page, accept the
default IP address, or enter an IP address in your
allowed public IP range. Click Next.
Note:
The default IP address is the WAN IP address of your
SonicWALL security appliance. If you accept this
default, all HTTP and HTTPS traffic to this IP address
will be routed to your SonicWALL SRA.
7. The 'Public Server Configuration Summary' page displays
all the configuration actions that will be performed to create
the public server. Click Apply to create the configuration
and allow access from the WAN to the SRA on the DMZ.
Page 30 Scenario A: SRA on a New DMZ
Allowing an SRA -> LAN Connection
When users have connected to the SRA, they need to be able
to connect to resources on the LAN. To allow an SRA to LAN
connection, perform the following steps:
1. Navigate to the Network > Address Objects page.
2. In the 'Address Objects' section, click
3. In the 'Add Address Object' dialog box, create an address
object for the X0 interface IP address of your SonicWALL
SRA:
Name
Zone Assignment
Type
IP Address
4. Click Add to create the object. Once done, click Close.
5. Click again to create an address object for
the NetExtender range.
.
Name for the SonicWALL SRA
SRA
Host
SonicWALL SRA's 'X0' IP address,
192.168.200.1 by default