Nokia 7110 User Manual page 47

Tip: You can also add a new name to a caller group by first
recalling the desired name and number from the phone book,
then pressing Options, then rolling to Caller groups
and pressing Navi Roller, and then rolling to the desired caller
group and pressing Navi Roller.
Setting a ringing tone or graphic for a caller group
and renaming a caller group
1 Press Names, roll to Caller groups and press Navi Roller.
2 Roll to desired caller group and press Navi Roller.
3 Roll to one of the following settings and press Navi Roller.
Group title
To rename the caller group, key in a new name and press OK.
Group ringing tone
To set the phone to ring a specific ringing tone for the group, roll
to the desired tone and press OK. Default is the tone selected
for the currently selected profile.
Group graphic
To set the phone to display the group graphic, roll to On and
press Navi Roller.
The option list includes options for viewing and sending
(Send graphic) the graphic as an Over The Air (OTA) mes-
sage, if supported by your network.
You can also receive a new group graphic to your phone as an
OTA message. When you receive a group graphic, press Show,
then press Options, select Save or Discard and press
Navi Roller. If you selected Save, reach the desired caller
group and press Navi Roller.
See also "Copying via IR"on page 46 and "Transmitting data"
on page 76.
Removing a name and number from a caller group
1 Press Names, roll to Caller groups and press Navi Roller.
2 Roll to desired caller group and press Navi Roller to select it.
©2000 Nokia Mobile Phones. All rights reserved.
Phone book functions
47