Volume #<N> Expansion Disabled; Volume #<N> Initializing Parity; Volume #<N> Rebuild Failure - HP StorageWorks MSA500 G2 User Manual

110 Volume #<n> Expansion Disabled
Type: Informational
Description: The controller disabled a volume expansion operation on the
configured volume. This condition can result from the following:
•
An ongoing rebuild operation
•
Another expansion operation
•
Disabled cache memory caused by a low battery
This expansion resumes after the condition has been cleared.
Action: Wait for the current operation to finish. If the condition doesn't change,
replace the cache module.
111 Volume #<n> Initializing Parity
Type: Informational
Description: The controller is calculating and storing parity information for the
configured volume and performance may be low until this operation is complete.
Action: None
112 Volume #<n> Rebuild Failure
Type: Error
Description: The rebuild operation on the configured volume failed.
Action: If the volume is still operating in regenerative mode, remove the
replacement drive and replace it with a different new drive.
Troubleshooting 115