3
GENERAL DESCRIPTION
control unit is a fire detection control unit manufactured in conformity with theEN 54-2 and
MA-2000
EN 54-4 rules.
Technical features:
Multi-microprocessor system with 7" / 17,78 cm TFT display (800 x 480 with backlit), 256 colors touchscreen with
keyboard simulation to program and configure the system and the following specific functions:
End Delay, Silence Buzzer, Silence/Resound, Reset, Evacuation.
Detection LINES:
•
2 analogue loops programmable to closed or open loop for the connection of the field elements.
•
Each loop can drive 99 detectors + 99 input and output modules with Morley / System sensor protocol.
POWER SUPPLY:
•
Input: 100 ... 120 V AC, 50 / 60 Hz, max. 3,0 A
200 ... 240 V AC, 50 / 60 Hz, max. 1,7A
•
Voltage: 24 V DC / max. 6,25 A
•
User output: 28 V DC (+ 3 % +/- 18 %) 1 A, on board to power external loads such as sirens, bells, etc.
•
Primary Power Section:
- I max. A 1,91 A
- I max. B 2,7 A
- I min. 341 mA (with typical loop load connected)
•
Fuse: 230 V AC / 3,15 A
OUTPUTS:
•
1 Supervised Sounder Output (EOL 4
•
1 General Alarm Output with contacts free from voltage / supervised Output (EOL 4
•
1 General Fault Output with contacts free from voltage
•
2 Optional outputs with contacts free from voltage / supervised Output (EOL 4
Mechanics
The control unit mechanics is suitable for wall installations.
For cabinet sizes refer to the below drawing "MA-2000 dimensions"
•
Protection grade: IP 30
•
Operation temperature: -5 °C ... +40 °C
•
Storage temperature
•
Weight: 7 Kg
Main Functions
•
3 password levels (Operator - Maintenance – Configuration)
•
4 total access levels in conformity with the EN 54 rules
•
40 zonal indicators on screen display
•
Programmable text: point description through 32 characters; zone description through 32 characters
•
2000 physical zones, 800 logical equation, 400 logical groups (stand-alone), 1600 logical groups (network)
•
CBE Control Equations (Control-by event) for activation with logical operators (and, or etc.)
•
History Event file with the last 10.000 events in non-volatile memory
•
Real time clock
•
Line self-programming with automatic recognition of the type of the connected devices
•
Automatic recognition of points having the same address
•
Decision algorithms for the alarm and fault criteria
•
Automatic sensitivity changes Daytime /Night
•
Signalling of need for sensor cleaning
•
Signalling of poor sensor sensitivity
•
Programmable alarm threshold for sensors
•
Pre-defined software function programming for the various devices used
•
Walk-Test function for zones
M-167.1-MA2000-EN / 06.2022
7KΩ or Diode)
: -10 °C ... +50 °C
MA-2000
7 KΩ or Diode)
7 KΩ or Diode)
9