Device Connection - CAMBRIONIX SS15 User Manual

es decir, si el LED parpadea lo siguiente: BBBB SLSSSLSS, el número binario es 01000100.

7.4. Device connection.

If you are having device connection issues please read through the following common solutions
to see if this resolves your observed behaviour.
Device issues when updating
We have found that during updates on some devices the connection can be dropped or lost on
the device, this is due to devices going in and out of the bootloader and requiring different
power levels. Disabling CDP has resolved this issue for our customers.
You can disable CDP through NVRAM settings either by going through the advanced settings
and turning "Sync charge" off or through the API and disabling it via code. For example, the
instructions would be below using the command line.
settings_unlock
settings_set sync_chrg 0000000000000000
Conexión de dispositivo inestable
Some devices can have unstable connections with your host system through the SS15. We have
only observed this behaviour in a very few amount of devices, disabling CDP this has resolved
all issues and the connections are stable.
You can disable CDP through NVRAM settings either by going through the advanced settings
and turning "Sync charge" off or through the API and disabling it via code. Por ejemplo, usando
la línea de comando, las instrucciones serían las siguientes.
settings_unlock
settings_set sync_chrg 0000000000000000
Battery information for Android
If you are having issue displaying battery information on Android devices ensure firstly you have
ADB tool installed and open then try these things in order.
1.
Check that developer options are enabled on the android device, and then that USB
debugging is also enabled.
SS15 Página 29 de 38