Using Your Ss15; Using Without Connecting To Host; Using When Connected To Host; Connecting The Hub To A Host Computer - CAMBRIONIX SS15 User Manual

Hide thumbs Also See for SS15:

Table of Contents

5. Using your SS15

In this section, you can find information using your hub in charge or sync application. You can

also find information on managing your hub, changing port modes, connecting multiple hubs to

one host and using Cambrionix Software.

When the Hub is switched on and is not connected to a local host computer it is

automatically configured to charge devices using its intelligent charging algorithm. Connect the

devices to be charged to any of the available ports (not the Host Port) using

USB - compliant cables.

Once the devices are connected, the algorithm will detect the highest charge rate allowable for

each attached device. Charging at the optimum rate (up to 2,1 A) specified by the manufacturer

will commence once profiling is complete. Depending on the state of charge of the device

attached, this may take tens of seconds.

Connect the SS15 to your host system using a USB 3.2 Gen 1 Tipo-A cable. Using an incorrect

host cable may result in the hub and all subsequent ports not being recognised by your host.

When the Host Port is connected to a local computer, the hub defaults to Sync mode and

charge currents are determined according to USB Implementers Forum (USBIF) Super-Speed

USB3 specifications. If the attached device complies with USB-IF Battery Charging

specification BC1.2 and supports Charging Downstream Port (CDP), the hub can provide high-

speed charging at 2,1 A. If the connected device does not comply with BC1.2, the charge current

will be limited to 500mA in compliance with USB specifications.

If you wish to limit the charging to your devices whilst connected to your host system then you

can disable CDP on all ports by inputting the following commands.

The CLI commands for turning off the sync charge options, with a 1 or 0 per port.

settings_unlock

SS15

Página 11 de 38

Table of Contents