Aprilaire S86N MU Owner's Manual page 13

5. Adjust Leave details and/or select
Next to proceed
6. Adjust Return details and/or
select Next to proceed
7. Adjust Sleep details and/or select
Next to proceed
8. a) If you modified a group of days
you can Save & Exit back to the
Home screen
b) Or if you modified a single
day you can copy the settings to
another day or group of days
9. If you choose to copy, you will
see this confirmation message,
then you can return to the
Modify menu to make changes
to another day by selecting Edit
More Days or return to the Home
screen by selecting Save and Exit
24
5 6
Leave Return
Next Next Next
Start 8:00a Start 5:00p Start
Heat 70° Heat 70° Heat
Cool 70° Cool 70° Cool
Fan Auto Fan Auto Fan
8a 8b
Copy Day To... Copied to
All Days
Confirm All Days
Schedule
Save and Exit
Weekdays
Change
Edit More Days
Weekends
Save & Exit Monday
Cancel Tuesday
HEAT BLAST® (IF INSTALLED)
7
Heat Blast® will raise the current room temperature 3°F to 5°F based on the installer set-up, and
Sleep
then resume normal operation
12:00p To activate Heat Blast, select Heat Blast from the Menu, and use the Select button to set the
toggle to ON
70°
70°
NOTE: Heat Blast button is only available if it is enabled in the Installer Setup and the thermostat
Auto
is in Heat or Emergency Heat mode
To cancel Heat Blast, select Heat Blast from the Menu, and use the Select button to set the
toggle to OFF
9
25