Display Brightness; Backlight Timeout; Tone Settings; Enhancement Settings - Nokia 2126i User Manual

S e t t i n g s

Display brightness

You can change the brightness of your phone display.
1. In the standby mode, select
brightness.
2. Scroll up or down to adjust the brightness level to your preference.
3. Select OK to accept your settings.

Backlight timeout

Backlight timeout sets the delay time before the display backlight is switched off.
In the standby mode, select
timeout , and select a delay.

■ Tone settings

From this menu, you can adjust the ringing volume, keypad tones, and other tone
settings for the active profile. See "Customize a profile," p. 38, for more
information on profile settings.
Select Menu > Settings
Incoming call alert—Select how the device notifies you of an incoming call.
Ringing tone—Select the ringing tone for incoming calls.
Ringing volume—Set the volume of your ringing tone.
Vibrating alert—Turn the vibrating alert
Message alert tone—Select the tone for received messages.
Keypad tones—Set the volume of your keypad tones (or turn them off).
Warning tones—Turn warning and confirmation tones
Alert for—Define which caller groups the selected profile will accept or decline.

■ Enhancement settings

The enhancement settings menu is shown only if the phone is or has been
connected to a compatible enhancement.
In the standby mode, select
44
Menu > Settings
Menu > Settings
> Tone settings and one of the following options:
On
Menu > Settings
> Display settings
> Display settings
or Off.
On or Off.
> Enhancement settings
> Display
> Backlight
> Charger.