Dell XPS 15 9520 Service Manual page 62

Hide thumbs Also See for XPS 15 9520:
Table of Contents

Advertisement

Table 8. System setup options—Connection menu
Connection
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
Wireless Radio Control
Control WLAN radio
Dynamic Wireless Transmit Power
HTTPs Boot Feature
HTTPs Boot
HTTPs Boot Mode
Table 9. System setup options—Power menu
Power
Battery configuration
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Peak Shift
Enable Peak Shift
Thermal Management
USB Wake Support
Wake on Dell USB-C Dock
Block Sleep
62
System setup
Enable or disable the internal WLAN device
By default, the option is enabled.
Enable or disable the internal Bluetooth device
By default, the option is enabled.
Enable or disable UEFI Network Stack.
By default, the Enabled option is enabled.
Sense the connection of the system to a wired network and subsequently
disable the selected wireless radios (WLAN).
By default, the option is disabled.
Enable or disable Dynamic Wireless Transmit Power.
By default, the option is enabled.
Enable or disable the HTTPs Boot feature.
By default, the option is enabled.
With Auto Mode, the HTTPs Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTPs Boot reads Boot URL from the user-provided data.
By default, the Auto Mode option is enabled.
Enables the system to run on battery during peak power usage hours. Use the
table Custom Charge Start and Custom Charge Stop, to prevent AC power
usage between certain times of each day.
By default, the Adaptive option is enabled.
Enable or disable the advanced battery charge configuration.
By default, the option is disabled.
Enables the system to run on battery during peak power usage hours.
By default, the option is disabled.
Enables to cool the fan and processor heat management to adjust the system
performance, noise, and temperature.
By default, the Optimized option is enabled.
When enabled, connecting a Dell USB-C Dock will wake the system from
standby.
By default, the option is enabled.
Enables to block entering sleep (S3) mode in the operating system.
By default, the option is disabled.

Advertisement

Table of Contents
loading

This manual is also suitable for:

P91f

Table of Contents