Network Settings; Setting A Fixed Ip Address - Roland TrueVIS AP-640 Setup Manual

2. Network Settings

The IP address of this machine can be assigned automatically from a DHCP server. If there is a DHCP server
on your local network, no network settings are required. After connecting a LAN cable, carry out
the Software RIP(P. 67)
However, it takes time to assign the IP address if there is no DHCP server. If the message [Connection is
requiring too much time. Manually setting the IP address will improve the connection speed.] appears
when you tap
When connecting the computer and the machine directly, carry out
58).
In an environment where the computer being used is connected to multiple network devices and the Inter-
net, inappropriate settings will have a large effect on the entire network. For detailed information about
the settings, consult your network administrator.

Setting a Fixed IP Address

Procedure
1.
Tap .
2.
Tap [System Information]>[Network].
3.
Tap [Obtain IP Address Automatically] to set it to [Disable].
4.
Tap to the right of [IP Address].
The numeric value input screen appears.
5.
Enter the IP address.
For the IP address, contact your network administrator.
6.
Tap [OK].
56
Installation
on the computer you are using.
, carry out Setting a Fixed IP Address(P. 56).
Directly Connecting to the Computer(P.
Setting