Maintenance - Ryobi RRT4 Manual

■ Injuries may be caused, or aggravated,
by prolonged use of a tool. When
using any tool for prolonged periods,
ensure you take regular breaks.
■ Ambient temperature range for tool
during operation is between 0°C and
40°C.
■ Ambient temperature range for tool
storage is between 0°C and 40°C.
■ The recommended ambient temperature
range for the charging system during
charging is between 10°C and 38°C
ADDITIONAL BATTERY SAFETY
WARNINGS
■ To reduce the risk of fire, personal
injury, and product damage due to
a short circuit, never immerse your
tool, battery pack or charger in fluid
or allow a fluid to flow inside them.
Corrosive or conductive
such as seawater, certain industrial
chemicals, and bleach or bleach-
containing products, etc., can cause
a short circuit.
■ Ambient temperature
battery during use is between 0°C
and 40°C.
■ Ambient temperature
battery storage is between 0°C and
20°C.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with
local and national provisions and regulations.
Follow all special requirements on
packaging and labelling when transporting
batteries by a third party. Ensure that
no batteries can come in contact with
other batteries or conductive materials
while in transport by protecting exposed
connectors with insulating, non-conductive
caps or tape. Do
batteries that are cracked or leaking.
Check with the forwarding company for
further advice.
KNOW YOUR PRODUCT
See page 257.
1. Battery port
2. Battery cap
3. LED indicator
4. Variable speed Dial
5. On/off switch
6. Spindle Lock button
7. Collar
8. Quick-change collet*
9. Battery pack
10. USB-C port
11. Accessories
12. USB cable
13. Operator's manual
14. USB power adaptor
*Note:
If it is not possible to insert an accessory
into the quick-change collet, follow the
fluids,
instructions on page 267.
If it is not possible to release an
accessory from the quick-change collet,
using the provided wrench, follow the
instructions on page 268.
range for

MAINTENANCE

range for
■
■
not transport
■
The product should
connected to a
when assembling parts, making
adjustments, cleaning, performing
maintenance, or when the product
is not in use. Disconnecting the
product from the power supply will
prevent accidental
could cause serious injury.
When servicing, use only original
manufacturer's replacement parts,
accessories and attachments. Use
of any other parts may create a
hazard or cause product damage.
Avoid using solvents when cleaning
plastic parts. Most
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
never be
LT
ET
power supply
HR
SL
SK
BG
UK
TR
EL
starting that
plastics are
7