Table of Contents
Advertisement
ACK Reply (04H)
The monitor sends this command when all the
commands were correctly received and executed.
NAK Reply (05H)
The monitor sends this command when an error has
occurred after reception of the command.
The [0x05] command data is specified as the first data
byte of the command block.
An error which is found in the serial communication
port is sent in one data byte as the second byte data.
The errors are as follows:
Error
Error Type
Code
0x04
Checksum error
0x01
Command error
Explanation
The received command data is
not recognized as the data is
different from the checksum.
The received message is an
undefined message.
A communication error occurs.
The automatic adjustment such
as APA, AUTO CHROMA/
PHASE is working or the
automatic adjustment failed.
21
Command Description
Advertisement
Table of Contents
