Advertisement
Auto Tuning
Search and store TV channels automatically.
●
These steps are not necessary if the setup has been completed by your local dealer.
●
Please complete connections (p. 11 - 13) and settings (if necessary) of the connected equipment before starting Auto
Tuning. For details of settings for the connected equipment, read the manual of the equipment.
TV
14
Plug the TV into mains socket and switch on
1
●
Takes a few seconds to be displayed.
●
If the red LED shows on the TV, press the Standby On / Off switch on the
remote control.
Select the mode to tune
2
TV Signal Selection
Digital TV
D
Analogue TV
A
Start Auto Tuning
Select [Start Auto Tuning]
3
TV Signal Selection
Digital TV
D
Analogue TV
A
Start Auto Tuning
●
Auto Tuning will start to search for TV channels and store them.
The stored channels and sorted channel order vary depending on the area,
broadcasting system and conditions of signal reception.
Auto Tuning
Digital TV Scan
Analogue Scan
CH 21
21
Analogue TV Scan
CH 1
Analogue Scan
This will take about 6 minutes.
RF Ch
Channel Name
62
CBBC Channel
62
BBC Radio Wales
62
E4
62
Cartoon Nwk
29
33
Digital TV: 4
Analogue TV: 2
Radio: 0
Searching
Setup the wireless LAN connection
4
Setup the network connection to use DLNA features.
●
To setup the wireless connection, the Wireless LAN Adaptor (optional accessory)
is required. Please note that this TV does not support wireless public access points.
●
Ensure the network connections (p. 13) and network environment are completed
before starting setup.
Start wireless LAN connection setup?
Yes
: tune (search for the available channels)
: skip tuning
69
68
120
68
Type
Quality
Digital TV
10
Digital TV
10
Digital TV
10
Digital TV
10
Analogue TV
-
Analogue TV
-
No
●
To setup later on or skip this step
Select [No]
select
tune / skip tuning
select
access
(p. 49)
select
access
Advertisement
