Table of Contents
Advertisement
Best Practices
Device ID Assignment for Base Tracer
For unit controllers installed using a Base Tracer
ID using the BACnet
of the unit controller.
The following example in
Table 4.
BACnet
Unit controller rotary switch value (001)
Unit controller device ID set by Application SC: 22001
Device ID Assignment for Wireless Devices
For devices connecting over a wireless network, Tracer
network number and the rotary switch value of the wireless device.
The following example in
Table 5.
BACnet
Wireless unit controller rotary switch value (001)
Wireless unit controller Device ID set by Application SC: 13001
Customizing Device IDs
For complex BACnet
required. You can customize the device IDs of Tracer
tool. During the device installation process in Tracer
device ID of the unit controllers being installed" checkbox
devices will retain their device IDs. This feature applies to Trane and non-Trane BACnet
Figure 10. Customize device IDs (Tracer
18
®
®
network number of the Base Tracer
Table 4
Calculating the base Tracer
®
network number of Base SC MS/TP link 1 (22)
Table 5
Calculating the wireless device ID
®
network number of Tracer SC+ wireless network (13)
®
addressing schemes or prescribed job specifications, custom device IDs may be
SC+s
®
SC+, the Application Tracer
®
SC+ MS/TP link and the rotary switch value
illustrates this process.
®
SC device ID
®
SC+ calculates the device ID using the BACnet
illustrates this process.
®
unit controllers by using the Tracer
®
SC+, select the "Preserve the predefined BACnet
(Figure 10, p.
®
Synchrony device discovery page)
®
SC+ calculates the device
2
2
0
0
2
2
0
0
1
3
0
0
1
3
0
0
®
TU service
18). As a result, the installed
®
devices.
BAS-SVX51L-EN
1
1
®
1
1
®
Advertisement
Table of Contents
