Function Buttons - Nikon CoolPix 990 Manual

Function Buttons

By default, the (FUNC.1 ) controls
exposure mode, the
ton exposure compensation. Using the
FUNC 1 and FUNC 2 menus, you can
assign different functions to these buttons
in M-REC mode. For example, assigning white balance or me-
tering to either button makes it possible to adjust these set-
tings without using the menus. Alternatively, you can assign the
functions of the or
FUNC. 2 buttons, putting these functions where they can be
easily adjusted.
For more information on:
Exposure mode
Focus
Flash settings
Sensitivity
White balance
Exposure compensation
Metering
Exposure options
Mode
1
(FUNC. 2) but-
2
White Balance
Metering
S
OF F
MENU
buttons to the FUNC. 1 or
The following functions can be assigned to either button:
FUNC. 1
Option
Mode
SELECT SET
White
Balance
Metering
Exposure mode can not be used unless Mode is assigned to one of the
two buttons. If neither button is assigned the exposure compensation
function, exposure compensation can only be adjusted using the Exp. +/–
item in the M-REC EXPOSURE OPTIONS sub-menu.
Function Assigned
Exposure mode
Focus mode/manual focus (functions in
same way as button)
Flash setting/sensitivity (functions in same
way as button)
White balance (press while turning com-
mand dial to select white-balance program;
while button is pressed, W-BAL indicator
and white-balance program are displayed in
control panel shutter-speed/aperture
display as follows: Pre = Preset [restores
last recorded preset white value],
Sun = Fine, Inc = Incandescent,
Flu = Fluorescent, Clo = Cloudy,
Fla = Flash, no display = Auto)
Exposure compensation
Metering method (press while turning
command dial to select metering method)
88