Fujitsu ETERNUS DX Configuration Manual page 9

Chapter 1 Workflow
1.2 When the Multipath Driver is Used
Setting Up the Server
Set the parameters required for connection to the ETERNUS DX.
"7.1 For Fujitsu SAS Cards" (page 17)
•
"7.2 For LSI Logic SAS Cards" (page 17)
•
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX.
"Chapter 8 LUN Recognition" (page 18)
•
When the ETERNUS Multipath Driver is used
Setting Up and Checking the ETERNUS Multi-
path Driver
Set up and check the ETERNUS Multipath Driver.
"9.1 Setting Up and Checking the ETERNUS Mul-
•
tipath Driver" (page 21)
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux
Copyright 2018 FUJITSU LIMITED
When the device-mapper multipath is used
Setting Up and Checking the device-mapper
multipath
Set up and check the device-mapper multipath.
"9.2 Setting Up and Checking the device-mapper
•
multipath" (page 21)
"Configuration Guide -Server Connection- (Fibre
•
Channel/FCoE/iSCSI/SAS) for Linux device-map-
per multipath"
9
P3AM-3472-14ENZ0