Function - Alfa Romeo Giulia GTA Owner's Handbook Manual

170
SETTING A DESTINATION
The following data are required to set a
destination:
"City/Post code": enter the name
or ZIP code of the city of the new
destination arrival point;
"Address": enter the street name of
the new destination;
"House Number": enter the house
number of the new destination;
"State" (where applicable/necessary):
enter the name of the state of the new
destination arrival point.
"Start Navigation": select the desired
destination using the right side of the
display. This will provide access to the
route planning screen to start navigating.
NOTE The data above can be order
entered in any order ("Free Text Search"

function).

To set a new destination, select
the graphic button (using the
196
"touchscreen" function or by rotating
the Rotary Pad): the graphic keyboard
for entering the destination address will
appear on the display and the list of
"Destinations" will appear on the right
side.
Management of voice recognition for
entering navigation addresses
Pressing the button
side of the steering wheel to start the
12126S2010EM
voice recognition session and send the
necessary commands to the Connect
system to enter a navigation address.
You can enter addresses in two different
ways:
One-shot: Say "Navigate to <City,
Address, House Number>" after pressing
the button on the right side of the
steering wheel and starting the voice
recognition session. The Connect system
will be able to recognise the address
you inserted or display a list of possible
alternatives. Then follow the instructions
provided by the Connect system to start
route calculation.
Manual entry: The Connect system will
help you entry individual fields through a
guided procedure, with the possibility of
using the "City", "Address" and "House
Number" voice commands. To activate
this mode, press the button
on the right side of the steering wheel
and starting the voice recognition
session, send the first command to
enter the city and continue following the
instructions provided by the Connect
system.
If a language change is made on the
Connect system, using the dedicated
menu in the "Settings" on the display, a
pop-up screen will appear informing the
driver of the limited availability of the
on the right
voice recognition functions.
If you choose the English language on a
car sold in Italy the following message
will appear on the display of the Connect
system: "When the vocal system is set
to English you can input addresses
in the United Kingdom, Ireland, Malta
and Gibraltar. You can also insert all
destinations manually.".
WARNING The above message is located
according to the country of destination
of the vehicle. Only the countries shown
on this pop-up screen will be available
with voice recognition functions for
address and destination selection. The
available countries will change according
to the language type selected by the
driver.
NOTE The "one-shot" address entry
mode will not be available if the driver
chooses a language other than the one
used in the country in which the car was
located
marketed. In this case, in order to access
the voice recognition functions and enter
a valid address, i.e. recognisable by the