Hazard Warning Lights; Sos Call And Assist Call - Alfa Romeo Giulia GTA Owner's Handbook Manual

HAZARD WARNING LIGHTS

CONTROL
27)
Press hazard lights button fig. 109 to
switch the lights on/off.
When the hazard lights are on, the
warning lights and flash.
When you need to move away from
the vehicle to look for help, the hazard
warning lights will continue flashing
even if the ignition device is in the STOP
position.
109
WARNING The use of hazard warning
lights is governed by the highway code
of the country you are driving in: comply
with legal requirements.
Emergency braking
In the event of emergency braking, the
hazard lights are switched on and the
warning lights and appear on
the instrument panel, depending on the
120
mode selected by the "Alfa DNA™ Pro"
selector.
When the "Alfa DNA™ Pro" selector
is in position "n" or "a", the activation
threshold of the hazard warning lights
is higher, while in position "d" the
sensitivity of the activation is lower than
that in the "n" and "a" modes.
With the "Alfa DNA™ Pro" selector in
the "RACE" position, the hazard warning
lights do not activate.
The lights switch off automatically when
emergency braking ceases. For further
details about the emergency braking, see
the "Active safety systems" paragraph in
the "Safety" chapter.
IMPORTANT
27) A prolonged use of the hazard warning
lights may discharge the battery.
08016S0001EM

SOS CALL AND ASSIST CALL

(for versions/markets where provided)
The car is equipped with on-board
assistance functions designed to provide
support in the event of accident and/or
emergency (SOS) or malfunctions of the
vehicle (roadside assistance - ASSIST)
managed by means of Alfa Connect Box.
The SOS function is activated:
automatically in the event of a major
collision recorded by the device aboard
the vehicle;
manually, by pressing the SOS button
located on the ceiling light fig. 110 or
by means of the appropriate menu
fig. 111 on the Connect system (for
versions/markets, where provided).
110
04136S0073EM