To create a three-second pause, follow the steps below:
Press and hold
on the display screen.
NOTE: You can enter up to 20 characters in a single entry, stored or
dialed.
NOTE: You can program your phone to pause for more than 3 seconds.
Performing the above step twice will program two pauses and
cause your phone to wait 6 seconds before entering the next set
of numbers.
Plus Dialing
This feature enables you to place an international call from most countries —
without entering the local international access code. Use Plus Dialing for all
Phonebook entries if you plan to travel outside the United States. You can enter
phone numbers into your phonebook using either Plus Dialing and Storing
Numbers Fast or Adding Phonebook Entries and Plus Dialing.
To add a phone number using Plus Dialing and Storing Numbers Fast
1
Press and hold
"+".
NOTE: The network translates the "+" into the appropriate
international access code needed to place the call.
2
Enter the country code, city code, or area code (as needed), and phone
number.
3
Continue by following the rest of the instructions for "Storing Numbers
and Private IDs Fast" on page 46.
*
for two seconds. The pause symbol (P) will appear
0
for two seconds. A "0" appears, then changes to a
Plus Dialing
51