Phone Based; Storing Names And Numbers - Motorola iDEN i500plus User Manual

Phone Based

NOTE: You may want to read "Pause Digit Entry" on page 17 and
"Plus Dialing" on page 27 before you create a stored list from
your phone. Using Pause Digit Entry and Plus Dialing will
enable you to create stored lists that will save time when plac-
ing calls.

Storing Names and Numbers

This programming function allows you to store up to 100 names, phone
numbers and private ID numbers. Your i500plus phone will
automatically assign the next available speed dial number, which you
can change. Once you have stored an individual, you can call them by
scrolling through the list and finding their name, using the speed dial
number or using Nextel Direct Connect (see "Nextel Direct Connect®"
on page 57). And, whenever the person calls you, your phone will
display their name if you entered their 10-digit phone number. The
display holds 12 phone-number characters. If the phone number exceeds
12 characters, you can pressounder "More" to see the remaining
characters. To return to the start of the number, pressounder
"Numbr".
You can store up to 100 names, phone numbers and private IDs using
the following steps:
Press * then # then 2 then 0.
1
The message: 20=Phone / Prvt List displays. Pressounder
2
"OK". Another message will display with the remaining number
of slots available. The phone will then display the Enter Name
screen.
Enter the name of the individual you want to store. (Notice, each
3
key has a number and several letters. To select different letters
on a key, quickly press the key until the desired letter displays.
For example, to enter the letter Y you must press the 9 key 3
times quickly. Also, you can press and hold # to change the
case of the letter you just entered (lower to upper and upper to
lower case). The default style is upper case.)
NOTE: Press the left side of the
After you have entered the name, pressounder "Store".
16
delete a letter. Press the right side of the
insert a space.
www.nextel.com
lr
button to backspace or
lr
button to