Group Connect Tm Calls, Talkgroups, And Scangroups - Motorola iDEN i325 User Manual

You can set up more Groups in 2 ways:
• Using Group Connect Management* on
MyNextel at nextel.com.
* You must be an account administrator to use Group Connect
Management.
• Using Wireless Manager to create, manage, and
delete Groups.
When you create your Groups, you can select your
own Group numbers.
Talkgroups Not in Scangroups
If you have a Talkgroup saved to Contacts that is
not in a Scangroup, you cannot join that Talkgroup
from Contacts or the recent calls list unless you
create a Scangroup for it in Contacts.
To create a Scangroup for a Talkgroup:
1 Begin creating a new Contacts entry. See
"Creating Entries" on page 42.
2 Assign the Scangroup Contacts type to the
entry.
3 Assign the Talkgroup number as the number of
the Scangroup.
This creates a Scangroup with the same number
as the Talkgroup it contains.
Group Connect TM Calls, Talkgroups, and Scangroups
You can also join a Talkgroup that is not in a
Scangroup by pressing # and then entering the
Talkgroup number using the keypad. Your phone
treats this as if you had joined a Scangroup
containing only that Talkgroup.
Joining a Scangroup
To make and receive Group Connect calls, you
must join a Scangroup.
When you join a Scangroup, you can make or
receive Group Connect calls only with Talkgroups
in that Scangroup. You can only belong to one
Scangroup at time.
To join a Scangroup:
1 Press #. Enter the Scangroup number using
the keypad. -or-
Scroll to the Scangroup name in Contacts or
recent calls list.
2 Press A under Join.
Viewing Scangroup Details
While you belong to a Scangroup, you can see
which Talkgroups are in it.
1 From the recent calls list, scroll to the
Scangroup.
2 Press m.
55