Viewing Contacts - Motorola iDEN i325 User Manual

Note: You can store numbers up to 64 digits
long, but every 20 digits must be
separated by a pause or wait. See
"Creating Pauses and Waits" on page 45.
• A Speed Dial number — When you store a
phone number, it is assigned a Speed Dial
number. You can accept the default Speed Dial
number or change it.
• A voice name — If you create a voice name for a
number, you can then dial that number by
saying the voice name into your phone. This
P
icon appears to the left of the Contacts type
icon if a voice name is assigned.

Viewing Contacts

To access Contacts:
Press A under Contcs. -or-
From the main menu, select Contacts. -or-
If you are on a call: Press m. Select Contacts.
To view entries:
1 From the Contacts list, scroll to the entry you
want to view.
2 If an entry has more than one number or
address stored, <> surrounds the Contacts type
icon. Scroll left or right to view the icon for each
number stored in the entry.
3 When the icon for the number or address you
want to view is displayed, press A under View.
-or-
If View is not one of your options: Press m.
Select View.
4 Scroll to view the other numbers and addresses
stored for the entry.
Tip: To view more entries, continue scrolling.
Searching for a Name
To search for a name in Contacts:
1 From the Contacts list, press m.
2 Select Search.
3 Enter the name you want to see. See "Entering
Text" on page 37.
4 Press A under Ok.
Your phone finds the name you entered or the
nearest match.
Showing Only Direct Connect
Numbers and Groups
To set Contacts to show only entries that contain
Direct Connect numbers and entries for Talkgroups
and Scangroups:
1 From the Contacts list, press m.
Viewing Contacts
®
41