2.1 CONDENSATE DRAIN CONNECTION
The condensate output and electrical connections can be at eith er end of th e machine, at
th e side or in th e back, depending on th e requirements of th e user. To gain access to th e unit
remove th e covers, unscrewing th e fi xing screw in both end mouldings.The driptray can be
removed and turned round. Remove th e desired knockouts, insert grommet (supplied) and route
condensate pipe th rough th e knockout.(Tube outside diameter 19mm).
REMOVAL OF COVERS
CONDENSATE
DRAIN
CONDENSATE
DRAIN
L
22
40
22
DH66 DEHUMIDIFIER SHOWN.
POSITIONS OF KNOCKOUTS FOR CONDENSATE DRAIN CONNECTION
Page 5
SD496251 iss 9