Lennox LI012CI-170P432-1 Service Manual page 114

Service Manual
Step
10.Remove compressor
Remove 3 foot nuts on compressor, and
then remove the compressor.
Note:
Protect the ports of discharge pipe and
suction pipe to avoid foreign objects to
enter it.
11.Remove clapboard
then remove the clapboard.
Remove Valve support sub-assy
Screw off the screws that are locking the
valve support sub-assy. Then remove it.
Installation and Maintenance
Procedure
Clapboard
Foot nuts
Compressor
Screw
Foot nuts
Screw
Valve Support Sub-Assy
111