Lennox LI012CI-170P432-1 Service Manual page 113

Step
7.Remove motor
remove the motor.
8.Remove motor support
and then remove the motor support.
9.Remove 4-way valve assy
Unsolder the spot weld of 4-way valve assy,
compressor and condenser, and then remove
the 4-way valve assy .
Note:
When unsoldering the spot weld, wrap the
4-way valve with wet cloth completely to avoid
damaging the valve due to high temperature.
110
Procedure
Screw
Screw
Motor
Motor support
4-way valve assy
Spot weld
Installation and Maintenance
Service Manual