Assembly Overview - Add-On Parts - Volkswagen Tiguan 2016 Workshop Manual

1.2

Assembly overview - add-on parts

⇒ "1.2.1 Assembly overview - front bumper cover add-on parts,
onroad version", page 271
⇒ "1.2.2 Assembly overview - front bumper cover add-on parts,
offroad version", page 272
⇒ "1.2.3 Assembly overview – bumper cover add-on parts R-Line
", page 274
1.2.1 Assembly overview - front bumper cover add-on parts, onroad version
Note
Different versions depending on model version; for allocation refer to ⇒ Electronic parts catalogue ETKA
♦
The onroad version of the bumper cover has a ramp angle of 16°
♦
1 - Bumper cover
❑ Material PP/EPDM.
❑ Removing and installing
⇒ page 278
2 - Side cover
❑ Left and right
❑ Engaged in front bump‐
er cover
❑ Can only be removed
with front bumper cover
removed
3 - Centre air intake grille
❑ Engaged in front bump‐
er cover
❑ Can only be removed
with front bumper cover
removed
4 - Number plate holder
❑ Installed only in selec‐
ted models available in
selected markets
5 - Clip
❑ With clips or screws de‐
pending on version
6 - Spoiler
❑ Engaged in front bump‐
er cover
❑ Can only be removed
with front bumper cover
removed
7 - Fog light trim
❑ Left and right
❑ Pull forwards out of detent.
8 - Cover for towing eye
❑ Engaged in front bumper cover
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 01.2018
⇒ page 269 .
271
1. Bumper, front