Accessing An External Bluetooth Audio Source (A2Dp); Accessing An External Bluetooth ® Audio Source And Starting Playback - Porsche Classic Operating Manual

Calling a number from the list of numbers
last dialled
1. Press the PHONE key.
2. Select menu option Last numbers.
3. Select the menu entry of the phone number
and make the call.
List of received calls
When a mobile device is bonded to the PCRN
via Bluetooth, the mobile device's call lists are
®
transferred and displayed as soon as the bonding
is completed. The number of the last incoming
call is at the top of the list.
Not all mobile devices support the transfer of
phonebook and call list.
1. Press the PHONE key.
2. Select menu option RECEIVED CALLS.
3. The list of the last incoming calls is displayed.
Calling a number from the list of last
incoming calls
1. Press the PHONE key.
2. Select menu option RECEIVED CALLS.
3. Tap the menu option of the phone number
required and make the call.
List of missed calls
When a mobile device is bonded to the PCRN
via Bluetooth the mobile device's call lists are
®,
transferred and displayed as soon as the bond-
ing is completed. The number of the last missed
call is at the top of the list.
34
PHONE
Not all mobile devices support the transfer of
phonebook and call list.
1. Press the PHONE key.
2. Select menu option Missed calls.
3. The list of last missed calls is displayed.
Calling a number from the list of last
missed calls
1. Press the PHONE key.
2. Select menu option Missed calls.
4. Tap the menu option of the phone number
required and make the call.
Accessing an external
Bluetooth audio source (A2DP)
®
You can also use Bluetooth to bond an external
®
audio source whose functions are not fully control-
led by the PCRN but must be controlled at the
source itself.
For the bonding and control of external Blue-
tooth audio sources the PCRN supports the
®
A2DP profile. The extent to which an external
Bluetooth audio source can be controlled
®
by the PCRN depends on the functions sup-
ported by the audio source. In some cases,
the control of the external Bluetooth
source may be restricted. In other cases, the
source cannot be controlled by the PCRN at
all. Then you must use the control elements
provided at the bonded device. Please
observe the operating instructions of the cor-
responding device.
Risk of accident. Any distraction may lead to
a loss of control over your vehicle.
Only operate the external Bluetooth

source when it is safe to do so and when traf-
fic permits. If you have any doubt, stop and
operate the external Bluetooth
with the vehicle at standstill.
Accessing an external Bluetooth
source and starting playback
In order to bond external audio sources (usually
mobile devices) to your PCRN via Bluetooth
PCRN must first be bonded to the mobile device
as described in section describing Bluetooth
telephony (see explanations under 'Logging in
the mobile device'/'Bonding from an external
Bluetooth device). To start playback, proceed as
®
follows:
1. Press the PHONE or MEDIA button.
2. Select menu option BT audiostreaming.
3. Tap button Play
played back.
audio
®
audio
®
audio source
®
audio
®
, the
®
-
®
. The audio source is