Input Response Time Setting Function - Mitsubishi Electric MELSEC iQ-RX40NC6B Application User's Manual

Input response time setting function

This function allows changing the input response times of the input module with diagnostic functions for each input. The input
module with diagnostic functions takes in external inputs with the set input response times.
External input (X0)
Input signal in the module (X0)
t: Input response time
Setting procedure
Set the following item from "Basic setting".
• "Input response time setting" ( Page 95 Input response time setting)
[Navigation window]  [Parameter]  [Module Information]  Target module  [Module Parameter]  [Basic setting]
Input response time and pulse width to be ignored as noise
The input module with diagnostic functions may take in noise and others as input because of the setting of an input response
time.
The following table lists the minimum pulse widths that can be taken in as input. The pulse width to be ignored as noise should
be less than the following minimum values:
Set an input response time with due consideration for the following values and use environment.
Input response time setting value
1ms
5ms
10ms
20ms
70ms
ON
OFF
ON
OFF
t
Minimum pulse width that can be taken in as input (Reference value)
1.0ms
5.0ms
10.0ms
20.0ms
70.0ms
t
1.1 Input Function
1
1 FUNCTIONS
21