Health O Meter 499KL Manual page 12

SET UP INSTRUCTIONS (CONTINUED)
®
Everlock
(499KL only, this feature is not available on 499KG)
®
The Everlock feature allows the measuring unit to be permanently locked on the scale,
disabling the UNIT button. The Everlock
procedure to engage Everlock
Warning: This lock is permanent and cannot be reversed.
Notes:
• Press CLEAR at any time to exit the Everlock
• Once Everlock
®
is engaged the Unt and UdP options will no longer be displayed
when scrolling through the Options menu.
• There is no method to undo Everlock
manufacturer.
1. While the scale is turned off, press and hold the ENTER button then press and
release the ON/OFF button. Hold the ENTER button until "AOF=d" or "AOF=E"
appears on the display. Use the ▲ or ▼ buttons to advance the display screen until
"ELC" appears. Press the ENTER button to change the setting.
ELC =d Default setting with Everlock
ELC = E Engages Everlock
you to begin the locking procedure. If this is desired, follow the instructions
below.
is selected, "PASS1" will appear on the display. This prompts the
®
2. After Everlock
user to enter a password. Press the following keys in this sequence:
BMI, ENTER, ▼, ▲
3. If entered correctly, "ELC=L" (if scale was in LB mode) or "ELC=6" (if scale was in
KG mode) will appear on the display.
4. Use the ▼ and ▲ keys to toggle between (L) Pounds and (6) Kilograms. When the
desired unit is displayed, press ENTER and "PASS2" will appear on the display.
5. This will prompt the user to enter the second password. Press the following keys in
this sequence:
▲, ▼, ENTER, BMI
6. If entered correctly, the scale will display "ELC = L" or "ELC = 6," depending on the
unit of measurement that was selected. Everlock
UM499KL REV20210521
default setting is "disabled". Follow this
®
®
.
®
procedure.
®
without sending the scale back to the
®
disabled.
®
. Once this option is selected, the display will prompt
12
®
is now engaged.
Back to Home Page