Checking The Timing Belt Tension (Z Belt) - Epson LS-B Series Maintenance Manual

7.4 Checking the Timing Belt Tension (Z Belt)

Name
Tool Sonic tension meter
Joint #3 (1) Enter appropriate setting values to the sonic tension meter.
Belt tension
check
(2) Strum the belt and measure tension.
NOTE
Measurement failure may occur if the

microphone touches the belt during
measurement.
LS-B series Maintenance Rev.1
Qty.
For details of usage and measurement methods of the tension
1
meter, refer to the instruction manual of the tension meter.
Model Belt
LS3-B Z belt
LS6-B Z belt
LS3-B LS6-B Maintenance 7. Joint #3
Note
Unit mass M
[g/ (1 mm width ×1 m
length)]
1.9
1.9
Width W Span S
[mm] [mm]
9 127
10 212
65