NETGEAR MA701 User Manual page 27

User Guide for the NETGEAR 802.11b Wireless Compact Flash Card MA701
Verify wireless connectivity to your network.
Verify that the Status information matches your wireless network.
a.
Check the LED on the MA701:
b.
– Solid Green: Associated with an access point or ad-hoc wireless device.
– Flashing: Power save mode (default from power up or reset), not connected to an
access point, or associated with an ad-hoc network.
– Off: No power applied to the card.
Verify connectivity to the Internet or network resources.
c.
Note: If you are unable to connect, see
Basic Setup for a PDA
"Troubleshooting" on page
M-10204-1
3-10.
3-7