NETGEAR MA701 User Manual page 17

User Guide for the NETGEAR 802.11b Wireless Compact Flash Card MA701
Table 2-1. A Road Map for How to Get There From Here
If I Want To? What Do I Do?
Connect to the
1. Activate my
Internet over my
wireless link
wireless
and verify my
network.
network
connection.
2. Open an
Internet
browser.
Introduction
What's Needed?
1. An active Internet connection
like those from cable or DSL
service providers.
2. A wireless network connected
to the cable or DSL Internet
service through a cable/DSL
router as illustrated in
"Connecting to an Access
Point in Infrastructure Mode"
on page 5-2.
3. TCP/IP Internet networking
software installed and
configured according to the
requirements of the local
network.
4. A browser.
M-10204-1
How Do I?
To configure your MA701 in
Infrastructure Mode, see
Installation Instructions" on
page 3-4.
For assistance with configuring
the TCP/IP Internet software on
a PC, see "Preparing Your
Computers for TCP/IP
Networking" on page C-1
to the PC Networking Tutorial on
the NETGEAR 802.11b Wireless
Compact Flash Card Resource
CD (SW-10040-01) and the Help
information provided in the
Windows system you are using.
.
"Basic
or refer
2-5