Table of Contents
Advertisement
1)
Press as to select [HIGH ALTITUDE MODE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[HIGH1]
[HIGH2]
Note
f It is set to [OFF] when using the projector in the elevation of below
elevation of above
1 400 m (4 593')
m
(6 562')
and below 2 700 m
f Do not set the projector in the elevation of
malfunctions.
f When it is set to [HIGH1] or [HIGH2], the fan noise becomes louder and fan speed increases.
[LAMP POWER]
Switch the luminance of the luminous lamp according to the operating environment of the projector or the
purpose.
1)
Press as to select [LAMP POWER].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[ECO]
Note
f The projector can consume less power, extend the luminous lamp life longer and produce less operation noise when set from [NORMAL] to
[ECO].
[ECO MANAGEMENT]
This function optimizes the luminous lamp power according to the operating status and reduces power
consumption.
1)
Press as to select [ECO MANAGEMENT].
2)
Press the <ENTER> button.
f The [ECO MANAGEMENT] screen is displayed.
3)
Press as to select one item.
Setting [AUTO POWER SAVE] in Step 3)
Set whether or not to enable the three functions, [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] and [AV
MUTE DETECTION].
Note
f [AUTO POWER SAVE] cannot be set when the [LAMP POWER] is set to [ECO].
4)
Press qw to switch the [AUTO POWER SAVE].
[ON]
[OFF]
5)
Press as to select one item.
[AMBIENT LIGHT DETECTION]
[SIGNAL DETECTION]
[AV MUTE DETECTION]
6)
Press qw to switch the item.
72 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Select when using the projector in the elevation of below 1 400 m (4 593').
Select when using the projector in the elevation of above 1 400 m (4 593') and below 2 000 m (6 562').
Select when using the projector in the elevation of above 2 000 m (6 562') and below 2 700 m (8 858').
and below 2 000 m
(6
562'). It is set to [HIGH2] when using the projector in the elevation of above
(8
858'). Failure to do so may shorten the life of the internal parts and result in malfunctions.
2 700 m
(8 858') or above, otherwise it may shorten the life of the internal parts and result in
Select when high luminance is required.
Select when high luminance is not required.
Enables power-saving mode.
Disables power-saving mode.
Adjusts the luminous lamp power according to the ambient brightness.
Drops the luminous lamp power when no signal is input.
Drops the luminous lamp power in the AV mute mode.
1 400 m (4
593'). It is set to [HIGH1] when using the projector in the
2 000
Advertisement
Chapters
Table of Contents
