For Windows 2000 Users Installing A Ma401 - NETGEAR MA401 Reference Manual

Reference Guide for the Model MA401 802.11b Wireless PC Card

For Windows 2000 Users Installing a MA401

If an earlier version of the Netgear MA401 Wireless PC
Note:
Card was previously installed on your notebook, you must
remove the old driver and utilities before you can install the new
PC Card and software.
Insert the MA401 PC Card into your computer.
Power on your notebook and let the operating system boot up
a.
completely.
Have the Windows 2000 operating system installation files handy.
b.
Windows 2000 needs these files to complete the creating and
installation of new network adapter hardware drivers.
Insert the Model MA401 Resource CD into your CD-ROM
c.
drive.
Note: You may need to be logged on to Windows 2000 with
administrator rights to complete the installation of new hardware to
your PC.
Locate an available PCMCIA or CardBus slot on the side of your
d.
notebook. If your notebook computer has two PCMCIA or CardBus
slots, the MA401 wireless PC Card can be inserted into either slot.
Hold the PC Card with the Netgear logo facing up and insert it into
e.
the PC card slot.
Installing the MA401 802.11b Wireless PC Card 2-13